Close
- Home
- Markets Served
Corrosion Prevention Packaging
- Our Products
- Mil-PRF-131
- Blog
- About Us
- Contact Us
Close
- Home
- Markets Served
Corrosion Prevention Packaging
- Our Products
- Mil-PRF-131
- Blog
- About Us
- Contact Us
Do you have any questions about our products? Maybe you are not sure what Barrier foil is? Are you unsure if you even need Barrier foil? We are here to assist all our new and existing customers with any questions you may have.
Please read our frequently asked questions, which will hopefully address and answer all your questions. If you have any further questions or require any further information, please contact us and one of our packaging experts can assist you.
Lay the loose base sheet on the pallet and place your item on top of the base. Once the item is secure, place the bag over the item and heat seal the bag to the base. Leaving a small gap at the end of the seal, pull all of the air out of the bag with a shop vac. For step-by-step instructions on how to use a box bag with a loose base, click here.
A box bag with a loose base is most commonly used with large, heavy items such as machinery, OEMs, export packing or electronic cabinets.
Important Safety Information: Before you use your industrial heat sealer, make sure the sealing bars are clear of any debris & the temperature gauge has been adjusted to your requirements. Once the device has been plugged in, you should see a red light indicating that it is connected to a power source. Once reaching the desired temperature for the heat sealer, a green light will appear on the device. The ideal temperature to seal Barrier foils is 375 F of constant heat.
To use the heat sealer, place the sealable material between the sealing bars and clamp them together. Wait 2-4 seconds before releasing the sealing bars and repeat the process with any other areas of the material that you wish to seal. For more information on the process of using a heat sealer, check out our video here.
Formula:
For temperate climates: W = 11ARM + DF
For tropical climates: W = 40ARM + DF
W = Weight in grams of basic desiccant
A = Area in square meters of the moisture vapor barrier
R = Water vapor transmission rate of the barrier in grams per square meter in 24 hours, measuring at 90% of RH and 38 ° C (100 ° F)
M = Maximum time in months of transit and storage
D = Weight in grams of blocking packaging, impact damping and any other hygroscopic packaging materials that are inside the barrier (including cardboard, timber, foam, etc.)
F = Factor, depending on the type of stowage
Mil-DTL-117 is the specification the government uses when it determines that an item it needs must be shipped to them in a bag form. Requirements include:
Mil-PRF-131L (Formerly Mil-PRF-131K) Class 1 is a water-vapor proof, foil laminate barrier material, used to make barrier bags and shrouds for corrosion protection. Mil-PRF-131 Class 1 materials must include the following printed in a lusterless red :
Apply Kwikstick directly to the barrier foil bag around the hole. Peel the backing and fit the fixing bolts. Click here for more information on how to use Kwikstick.
In theory yes.
There are companies in the US that actively recycle multi-layer aluminum laminates. They are often at capacity though and charge a premium for the service.
3D Barrier Bags, Inc.™ has a Waste Minimization statement that is available upon request. Where possible waste from our factory is sent to salvage the aluminum content rather than landfill.
Recycling of multi-layer laminates is becoming more and more common as consumers move from rigid to flexible packaging.
Our liners are produced with a “Chevron” bottom that opens up to the flat bottom of the liner. This video shows how to “pop” the base to form the flat bottom.